Principles and practices (WEEK 1)

This week I worked on defining my final project idea ( it includes motive of project , what i am going to make and how will i make that) and performed some Team building exercise.

IMPORTANT NOTE : ALL OF MY IMAGES ARE POP UP IMAGES , IF YOU HAVE ANY PROBLEM READINGS THOSE IMAGES , PLEASE CLICK ON THEM AND THEY WILL ENLARGE AUTOMATICALLY AND YOU CAN READ THEM EASILY

IDEA FOR FINAL YEAR PROJECT

MODULER ROOM AIR CLEANER

As you can see this is an pre-mature design of my project. basically my plan is to make an affordable Moduler air purifier which incorporate an ppm meter which is designed to record the ppm level and it is designed to to operate when ppm level increase an mark.

Purpose of thinking about the project is that:

My college Inderprastha engineering college is situated inside sahibabad industrial area and we experience very foul air which regularly come from near factory and are very dangerous for us too and it can be unbearable some time so to counter the problem .

I decided to design something like this. so This can be used by my college as well as small companies , buisnesses and home 's where requirement is low and they cannot afford costly filters products

My target is not to bring the air quality to a very good level because it will be very difficult to do this with this small air purifier , the main target is to make enviroment more bearable for students and if it impacts 10-20% it will be enough for me.

COMPONENTS GOING TO USED

* Dc fan
* 4 different air filter
* 3D printed parts
* A OLED screen
* Azone Led strip
* Plc circuit
* ppm meter

Technical skills needed

* PCB designing
* Programming.
* Knowledge of Input and Output devices
* Computer aided Design
* 3d printing

CHALLENGES WHICH I FEEL CAN COME UP

1. Well honestly saying i am well wors in 3D designing as well as 3D printing , so making its physical parts will not a difficult for me.

2. In my honest opinion , I am not good in electronic parts and Programming which I think will be a big problem for me , so I needed to be extra carefull with my work on that part of my project

for example:
1. Designing and Manufacturing Custom Pcb
2. Programming PPm sensor
3. Displaying the result of sensor on screen

TEAM BUILDING EXERSCISE'S

ACTIVITY 1

First our Local Guru rahul sir given us white chart paper an sticky notes so we can write variouse things like.

Q:1. For you , what documentation is?

Q:2. Who will see your page?

Q:3. What needed in webpage?

Q:4. What you should do in your webpage?

ACTIVITY 2

LEARNING SOME ORIGAMI WITH TEAM

STEPS TO MAKE A PAPER CRANE

Important Note!

This video was made by members of my team Afsha mam was the one who is making the paper crane and Neeraj sir was the one who is recording the video

* Take a origami paper

* Fold it diagnally for both diagnols

* Then fold it side ways similar to diagnols for both sides

* Push the centre and collapse

* After collapsing you will get image like above

* Fold the paper like kite but remember that pionted part should be towards the centre of the fold , not to the other side.

* Perform this on both sides and the fold the bottom part like given in the image.

* You will get something like this .

* Open It as given in the figure

* then open the inner side which was folded previously and try to make a diamond shape

* Perform the same procedure ont the both sides until you get a perfect diamond shape.

* Fold the petal on the petal acccording to the instruction given in the picture an perform this procedure for folding it in front ass well as backword also .