<b>RESISTOR</b>>NAME>VALUE<b>RESISTOR</b><p>
wave soldering>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>Resistor (US Symbol)</b>
<p>
Variants with postfix FAB are widened to allow the routing of internal traces<b>Pin Header Connectors</b><p>
<author>Created by librarian@cadsoft.de</author><b>PIN HEADER</b>>NAME>VALUE<b>PIN HEADER</b>>NAME>VALUEPIN HEADERPIN HEADER>NAME>VALUE<b>PIN HEADER</b><b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE>VALUE<b>SUPPLY SYMBOL</b><b>SUPPLY SYMBOL</b><b>JST XH Connector Long Pads (Package)</b><p>
Wire to board connector.
Pitch: 2,54 mm, (0.100")<p>
Number of pins: <b>2</b><b><P>
<b>Created by Rembrandt Electronics</b><p>
<b>www.rembrandtelectronics.com</b><p>>NAME>VALUE1<b>JST XH Connector Round Pads (Package)</b><p>
Wire to board connector.
Pitch: 2,54 mm, (0.100")<p>
Number of pins: <b>2</b><b><P>
<b>Created by Rembrandt Electronics</b><p>
<b>www.rembrandtelectronics.com</b><p>>NAME>VALUE1<b>JST XH Connector Long Pads (Package)</b><p>
Wire to board connector.
Pitch: 2,54 mm, (0.100")<p>
Number of pins: <b>4</b><b><P>
<b>Created by Rembrandt Electronics</b><p>
<b>www.rembrandtelectronics.com</b><p>>NAME>VALUE1<b>JST XH Connector Round Pads (Package)</b><p>
Wire to board connector.
Pitch: 2,54 mm, (0.100")<p>
Number of pins: <b>4</b><b><P>
<b>Created by Rembrandt Electronics</b><p>
<b>www.rembrandtelectronics.com</b><p>>NAME>VALUE1>NAME>NAME>VALUE<b>JST XH Connector 2 Pin</b><p>
Wire to board connector.
Pitch: 2,54 mm, (0.100")<p>
Number of pins: <b>2</b><b><P>
<b>Created by Rembrandt Electronics</b><p>
<b>www.rembrandtelectronics.com</b><p><b>JST XH Connector 2 Pin</b><p>
Wire to board connector.
Pitch: 2,54 mm, (0.100")<p>
Number of pins: <b>4</b><b><P>
<b>Created by Rembrandt Electronics</b><p>
<b>www.rembrandtelectronics.com</b><p><b>SOT-223</b>>NAME>VALUE<b>CAPACITOR</b>>NAME>VALUE>NAME>VALUE>NAME>VALUEADJINOUTOUTnon-polarized capacitor>NAME>VALUE<b>Voltage Regulator LM1117</b>
Standard adjustable voltage regulator but in SMD form. Spark Fun Electronics SKU : COM-00595<b>Phoenix Connectors</b><p>
Grid 5.08 mm<p>
Based on the previous libraries:
<ul>
<li>pho508a.lbr
<li>pho508b.lbr
<li>pho508c.lbr
<li>pho508d.lbr
<li>pho508e.lbr
</ul>
<author>Created by librarian@cadsoft.de</author><b>MKDSN 1,5/ 2-5,08</b> Printklemme<p>
Nennstrom: 13,5 A<br>
Nennspannung: 250 V<br>
Rastermaß: 5,08 mm<br>
Polzahl: 2<br>
Anschlussart: Schraubanschluss<br>
Montage: Löten<br>
Anschlussrichtung Leiter/Platine: 0 °<br>
Artikelnummer: 1729128<br>
Source: http://eshop.phoenixcontact.com .. 1729128.pdf>NAME>VALUEMKDSN 1,5/ 2-5,08 Printklemme
Nennstrom: 13,5 A
Nennspannung: 250 V
Rastermaß: 5,08 mm
Polzahl: 2
Anschlussart: Schraubanschluss
Montage: Löten
Anschlussrichtung Leiter/Platine: 0 °
Artikelnummer: 1729128
Source: http://eshop.phoenixcontact.com .. 1729128.pdf>NAME>VALUE<b>MKDSN 1,5/ 2-5,08</b> Printklemme<p>
Nennstrom: 13,5 A<br>
Nennspannung: 250 V<br>
Rastermaß: 5,08 mm<br>
Polzahl: 2<br>
Anschlussart: Schraubanschluss<br>
Montage: Löten<br>
Anschlussrichtung Leiter/Platine: 0 °<br>
Artikelnummer: 1729128<br>
Source: http://eshop.phoenixcontact.com .. 1729128.pdf
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.