/*
ESP8266 Server program to read Luminox O2 sensor.

By: Paul O'Neill

(C) Copyright Paul X. O'Neill, All rights reserved.

Receives from software serial port, sends to hardware serial port.
 * RX is digital pin 10 (connect to TX of level shifter: pin B1)
 * TX is digital pin 11 (connect to RX of level shifter: pin B2)
The code was written for hello-nodeMCU and Arduino IDE ver. 1.6.1. 
*/


#include <ESP8266WiFi.h>
#include <ESP8266WebServer.h>
 
const char* ssid = "backbarn";
const char* password = "fabacademy";

String form = "<form action='led'><input type='radio' name='state' value='0' checked>On<input type='radio' name='state' value='1'>Off<input type='submit' value='Submit'></form>";

String imagepage = "<img src='/led.png'>";

// This is a png file (led.png)
const char image[] = {
    0x89, 0x50, 0x4e, 0x47, 0x0d, 0x0a, 0x1a, 0x0a, 0x00, 0x00, 0x00, 0x0d, 0x49, 0x48, 0x44, 0x52,
    0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x10, 0x08, 0x02, 0x00, 0x00, 0x00, 0x90, 0x91, 0x68,
    0x36, 0x00, 0x00, 0x00, 0x01, 0x73, 0x52, 0x47, 0x42, 0x00, 0xae, 0xce, 0x1c, 0xe9, 0x00, 0x00,
    0x00, 0x04, 0x67, 0x41, 0x4d, 0x41, 0x00, 0x00, 0xb1, 0x8f, 0x0b, 0xfc, 0x61, 0x05, 0x00, 0x00,
    0x00, 0x20, 0x63, 0x48, 0x52, 0x4d, 0x00, 0x00, 0x7a, 0x26, 0x00, 0x00, 0x80, 0x84, 0x00, 0x00,
    0xfa, 0x00, 0x00, 0x00, 0x80, 0xe8, 0x00, 0x00, 0x75, 0x30, 0x00, 0x00, 0xea, 0x60, 0x00, 0x00,
    0x3a, 0x98, 0x00, 0x00, 0x17, 0x70, 0x9c, 0xba, 0x51, 0x3c, 0x00, 0x00, 0x00, 0x18, 0x74, 0x45,
    0x58, 0x74, 0x53, 0x6f, 0x66, 0x74, 0x77, 0x61, 0x72, 0x65, 0x00, 0x50, 0x61, 0x69, 0x6e, 0x74,
    0x2e, 0x4e, 0x45, 0x54, 0x20, 0x76, 0x33, 0x2e, 0x33, 0x36, 0xa9, 0xe7, 0xe2, 0x25, 0x00, 0x00,
    0x00, 0x57, 0x49, 0x44, 0x41, 0x54, 0x38, 0x4f, 0x95, 0x52, 0x5b, 0x0a, 0x00, 0x30, 0x08, 0x6a,
    0xf7, 0x3f, 0xf4, 0x1e, 0x14, 0x4d, 0x6a, 0x30, 0x8d, 0x7d, 0x0d, 0x45, 0x2d, 0x87, 0xd9, 0x34,
    0x71, 0x36, 0x41, 0x7a, 0x81, 0x76, 0x95, 0xc2, 0xec, 0x3f, 0xc7, 0x8e, 0x83, 0x72, 0x90, 0x43,
    0x11, 0x10, 0xc4, 0x12, 0x50, 0xb6, 0xc7, 0xab, 0x96, 0xd0, 0xdb, 0x5b, 0x41, 0x5c, 0x6a, 0x0b,
    0xfd, 0x57, 0x28, 0x5b, 0xc2, 0xfd, 0xb2, 0xa1, 0x33, 0x28, 0x45, 0xd0, 0xee, 0x20, 0x5c, 0x9a,
    0xaf, 0x93, 0xd6, 0xbc, 0xdb, 0x25, 0x56, 0x61, 0x01, 0x17, 0x12, 0xae, 0x53, 0x3e, 0x66, 0x32,
    0xba, 0x00, 0x00, 0x00, 0x00, 0x49, 0x45, 0x4e, 0x44, 0xae, 0x42, 0x60, 0x82
  };
  
// HTTP server will listen at port 80
ESP8266WebServer server(80);

const int solenoid = 16;  //ESP-12 pin1, D0, GPIO 16
const int led = 4;        //ESP-12 pin3, D2, GPIO 4
 
void handle_adc() {
  float val = analogRead(0);
  server.send(200, "text/plain", String(val));
}
 
void handle_led() {
  // get the value of request argument "state" and convert it to an int
  int state = server.arg("state").toInt();
  
  digitalWrite(led, state);
  digitalWrite(solenoid, state);
  server.send(200, "text/plain", String("LED is now ") + ((state)?"off":"on"));
}

void handle_image() {
  server.send(200, "image/png", "");
  WiFiClient client = server.client();
  client.write(image, sizeof(image));
}

void handle_webpage_with_image() {
  server.send(200, "text/html", imagepage);
}
 
void setup(void) {
  Serial.begin(9600);
  Serial.println("");
  pinMode(led, OUTPUT);
  pinMode(solenoid, OUTPUT);
  
  // Connect to WiFi network
  WiFi.begin(ssid, password);
  
  // Wait for connection
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print("-SOLENOID TEST-");
    digitalWrite(solenoid, HIGH);   // turn the SOLENOID on (HIGH is the voltage level)
    delay(1000);                       // wait for a second
    digitalWrite(solenoid, LOW);    // turn the SOLENOID off by making the voltage LOW
    delay(1000);                       // wait for a second
        digitalWrite(solenoid, HIGH);   // turn the SOLENOID on (HIGH is the voltage level)
    delay(1000);                       // wait for a second
    digitalWrite(solenoid, LOW);    // turn the SOLENOID off by making the voltage LOW
    delay(1000);                       // wait for a second
        digitalWrite(solenoid, HIGH);   // turn the SOLENOID on (HIGH is the voltage level)
    delay(1000);                       // wait for a second
    digitalWrite(solenoid, LOW);    // turn the SOLENOID off by making the voltage LOW
    delay(1000);                       // wait for a second
    }
  Serial.println("");
  Serial.print("Connected to ");
  Serial.println(ssid);
  Serial.print("IP address: ");
  Serial.println(WiFi.localIP());
   
  // Set up the endpoints for HTTP server
  //
  // Endpoints can be written as inline functions:
  server.on("/", [](){
   server.send(200, "text/html", form);
  });
  
  // And as regular external functions:
  server.on("/adc", handle_adc);
  server.on("/led", handle_led);
  server.on("/led.png", handle_image);
  server.on("/showled", handle_webpage_with_image);
  
  // Start the server 
  server.begin();
  Serial.println("HTTP server started");
}
 
void loop(void) {
  // check for incomming client connections frequently in the main loop:
  server.handleClient();
}