<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="9.3.1">
<drawing>
<board>
<plain>
<wire x1="57.15" y1="27.94" x2="101.58" y2="27.94" width="0.508" layer="20"/>
<wire x1="101.58" y1="27.94" x2="101.58" y2="53.01" width="0.508" layer="20"/>
<wire x1="101.58" y1="53.01" x2="57.15" y2="53.01" width="0.508" layer="20"/>
<wire x1="57.15" y1="53.01" x2="57.15" y2="27.94" width="0.508" layer="20"/>
</plain>
<libraries>
<library name="SparkFun-Boards">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
This library contains footprints for SparkFun breakout boards, microcontrollers (Arduino, Particle, Teensy, etc.),  breadboards, non-RF modules, etc.
&lt;br&gt;
&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is &lt;b&gt; the end user's responsibility&lt;/b&gt; to ensure correctness and suitablity for a given componet or application. 
&lt;br&gt;
&lt;br&gt;If you enjoy using this library, please buy one of our products at &lt;a href=" www.sparkfun.com"&gt;SparkFun.com&lt;/a&gt;.
&lt;br&gt;
&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;
&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="SPARKFUN_PRO_MICRO">
<description>&lt;h3&gt;SparkFun Pro Mico Footprint (with USB connector)&lt;/h3&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count: 24&lt;/li&gt;
&lt;li&gt;Pin pitch: 0.1"&lt;/li&gt;
&lt;li&gt;Area:0.7x1.3"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;SparkFun Pro Micro&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
</package>
</packages>
</library>
<library name="pinhead">
<description>&lt;b&gt;Pin Header Connectors&lt;/b&gt;&lt;p&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
<package name="1X06">
<description>&lt;b&gt;PIN HEADER&lt;/b&gt;</description>
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="B1" library="SparkFun-Boards" package="SPARKFUN_PRO_MICRO" value="SPARKFUN_PRO_MICRO">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="JP1" library="pinhead" package="1X06" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
</elements>
<signals>
<signal name="GND">
<contactref element="B1" pad="4"/>
<contactref element="B1" pad="23"/>
<contactref element="B1" pad="3"/>
<contactref element="JP1" pad="3"/>
</signal>
<signal name="RAW">
<contactref element="B1" pad="24"/>
</signal>
<signal name="RX">
<contactref element="JP1" pad="1"/>
<contactref element="B1" pad="1"/>
</signal>
<signal name="VCC">
<contactref element="B1" pad="21"/>
<contactref element="JP1" pad="4"/>
</signal>
<signal name="ENABLE">
<contactref element="JP1" pad="6"/>
<contactref element="B1" pad="13"/>
</signal>
<signal name="TX">
<contactref element="B1" pad="2"/>
<contactref element="JP1" pad="2"/>
</signal>
</signals>
</board>
</drawing>
</eagle>
