<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="9.3.1">
<drawing>
<schematic>
<libraries>
<library name="pinhead">
<description>&lt;b&gt;Pin Header Connectors&lt;/b&gt;&lt;p&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
<package name="1X06">
<description>&lt;b&gt;PIN HEADER&lt;/b&gt;</description>
</package>
<package name="1X06/90">
<description>&lt;b&gt;PIN HEADER&lt;/b&gt;</description>
</package>
</packages>
<symbols>
<symbol name="PINHD6">
<pin name="1" direction="pas" function="dot"/>
<pin name="2" direction="pas" function="dot"/>
<pin name="3" direction="pas" function="dot"/>
<pin name="4" direction="pas" function="dot"/>
<pin name="5" direction="pas" function="dot"/>
<pin name="6" direction="pas" function="dot"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="PINHD-1X6" prefix="JP" uservalue="yes">
<description>&lt;b&gt;PIN HEADER&lt;/b&gt;</description>
<gates>
<gate name="A" symbol="PINHD6"/>
</gates>
<devices>
<device name="" package="1X06">
<connects>
<connect gate="A" pin="1" pad="1"/>
<connect gate="A" pin="2" pad="2"/>
<connect gate="A" pin="3" pad="3"/>
<connect gate="A" pin="4" pad="4"/>
<connect gate="A" pin="5" pad="5"/>
<connect gate="A" pin="6" pad="6"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
<device name="/90" package="1X06/90">
<connects>
<connect gate="A" pin="1" pad="1"/>
<connect gate="A" pin="2" pad="2"/>
<connect gate="A" pin="3" pad="3"/>
<connect gate="A" pin="4" pad="4"/>
<connect gate="A" pin="5" pad="5"/>
<connect gate="A" pin="6" pad="6"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
<library name="SparkFun-Boards">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
This library contains footprints for SparkFun breakout boards, microcontrollers (Arduino, Particle, Teensy, etc.),  breadboards, non-RF modules, etc.
&lt;br&gt;
&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is &lt;b&gt; the end user's responsibility&lt;/b&gt; to ensure correctness and suitablity for a given componet or application. 
&lt;br&gt;
&lt;br&gt;If you enjoy using this library, please buy one of our products at &lt;a href=" www.sparkfun.com"&gt;SparkFun.com&lt;/a&gt;.
&lt;br&gt;
&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;
&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="SPARKFUN_PRO_MICRO">
<description>&lt;h3&gt;SparkFun Pro Mico Footprint (with USB connector)&lt;/h3&gt;
&lt;p&gt;Specifications:
&lt;ul&gt;&lt;li&gt;Pin count: 24&lt;/li&gt;
&lt;li&gt;Pin pitch: 0.1"&lt;/li&gt;
&lt;li&gt;Area:0.7x1.3"&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;
&lt;p&gt;Example device(s):
&lt;ul&gt;&lt;li&gt;SparkFun Pro Micro&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
</package>
</packages>
<symbols>
<symbol name="SPARKFUN_PRO_MICRO">
<description>&lt;h3&gt;SparkFun Pro Micro&lt;/h3&gt;
&lt;p&gt;3.3V/5V at 8MHz/16MHz. Does not require a USB to serial converter board for programming.  &lt;/p&gt;</description>
<pin name="2"/>
<pin name="*3"/>
<pin name="4"/>
<pin name="*5"/>
<pin name="*6"/>
<pin name="7"/>
<pin name="8"/>
<pin name="*9"/>
<pin name="*10"/>
<pin name="11(MOSI)"/>
<pin name="12(MISO)"/>
<pin name="13(SCK)"/>
<pin name="A0"/>
<pin name="A1"/>
<pin name="A2"/>
<pin name="A3"/>
<pin name="GND" direction="pwr"/>
<pin name="GND@2" direction="pwr"/>
<pin name="RAW" direction="pwr"/>
<pin name="GND@1" direction="pwr"/>
<pin name="RESET"/>
<pin name="RXI"/>
<pin name="TXO"/>
<pin name="VCC" direction="pwr"/>
</symbol>
</symbols>
<devicesets>
<deviceset name="SPARKFUN_PRO_MICRO" prefix="B">
<description>&lt;h3&gt;SparkFun Pro Micro &lt;/h3&gt;
&lt;p&gt;Atmega32U4 compatible footprint.&lt;/p&gt;

&lt;b&gt;&lt;p&gt;SparkFun Products:&lt;/b&gt;
&lt;ul&gt;&lt;li&gt;&lt;a href=”https://www.sparkfun.com/products/12587”&gt;3.3V/8MHz&lt;/a&gt;&lt;/li&gt;
&lt;li&gt;&lt;a href=”https://www.sparkfun.com/products/12640”&gt;5V/16MHz&lt;/a&gt;&lt;/li&gt;
&lt;/ul&gt;&lt;/p&gt;</description>
<gates>
<gate name="G$1" symbol="SPARKFUN_PRO_MICRO"/>
</gates>
<devices>
<device name="" package="SPARKFUN_PRO_MICRO">
<connects>
<connect gate="G$1" pin="*10" pad="13"/>
<connect gate="G$1" pin="*3" pad="6"/>
<connect gate="G$1" pin="*5" pad="8"/>
<connect gate="G$1" pin="*6" pad="9"/>
<connect gate="G$1" pin="*9" pad="12"/>
<connect gate="G$1" pin="11(MOSI)" pad="14"/>
<connect gate="G$1" pin="12(MISO)" pad="15"/>
<connect gate="G$1" pin="13(SCK)" pad="16"/>
<connect gate="G$1" pin="2" pad="5"/>
<connect gate="G$1" pin="4" pad="7"/>
<connect gate="G$1" pin="7" pad="10"/>
<connect gate="G$1" pin="8" pad="11"/>
<connect gate="G$1" pin="A0" pad="17"/>
<connect gate="G$1" pin="A1" pad="18"/>
<connect gate="G$1" pin="A2" pad="19"/>
<connect gate="G$1" pin="A3" pad="20"/>
<connect gate="G$1" pin="GND" pad="4"/>
<connect gate="G$1" pin="GND@1" pad="3"/>
<connect gate="G$1" pin="GND@2" pad="23"/>
<connect gate="G$1" pin="RAW" pad="24"/>
<connect gate="G$1" pin="RESET" pad="22"/>
<connect gate="G$1" pin="RXI" pad="2"/>
<connect gate="G$1" pin="TXO" pad="1"/>
<connect gate="G$1" pin="VCC" pad="21"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<parts>
<part name="JP1" library="pinhead" deviceset="PINHD-1X6" device=""/>
<part name="B1" library="SparkFun-Boards" deviceset="SPARKFUN_PRO_MICRO" device=""/>
</parts>
<sheets>
<sheet>
<plain>
</plain>
<busses>
</busses>
<nets>
<net name="RX">
<segment>
<pinref part="JP1" gate="A" pin="1"/>
<pinref part="B1" gate="G$1" pin="TXO"/>
</segment>
</net>
<net name="VCC">
<segment>
<pinref part="B1" gate="G$1" pin="VCC"/>
</segment>
<segment>
<pinref part="JP1" gate="A" pin="4"/>
</segment>
</net>
<net name="GND">
<segment>
<pinref part="B1" gate="G$1" pin="GND@1"/>
</segment>
<segment>
<pinref part="JP1" gate="A" pin="3"/>
</segment>
</net>
<net name="ENABLE">
<segment>
<pinref part="JP1" gate="A" pin="6"/>
<pinref part="B1" gate="G$1" pin="*10"/>
</segment>
</net>
<net name="TX">
<segment>
<pinref part="B1" gate="G$1" pin="RXI"/>
<pinref part="JP1" gate="A" pin="2"/>
</segment>
</net>
</nets>
</sheet>
</sheets>
</schematic>
</drawing>
</eagle>
