Arduino：1.8.10 (Mac OS X), ボード："ATtiny3216/1616/1606/816/806/416/406, ATtiny3216, 20 MHz, 1.8V, Disabled, Disabled, EEPROM retained, 0.55V, Enabled (default timer), PORTA (pins 0~3,14~17), Closer to 5v, TX:7, RX:6, SDA:8, SCL:9, SCK:16, MISO:15, MOSI:14"

In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:14:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h: In member function 'void TimerOne::setPeriodCPUCycles(long unsigned int)':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:89:26: error: 'CS10' was not declared in this scope
    clockSelectBits = _BV(CS10);
                          ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_rand.cpp: In function 'void randSeed()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_rand.cpp:119:2: error: 'ADCSRA' was not declared in this scope
  ADCSRA &= ~ (1 << ADIE); // adc Disable Interrupt, re-enable at end
  ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:89:26: note: suggested alternative: 'A10'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:95:27: error: 'CS11' was not declared in this scope
     clockSelectBits = _BV(CS11);
                           ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:95:27: note: suggested alternative: 'A11'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:101:28: error: 'CS11' was not declared in this scope
      clockSelectBits = _BV(CS11) | _BV(CS10);
                            ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_rand.cpp:119:2: note: suggested alternative: 'ADC_t'
  ADCSRA &= ~ (1 << ADIE); // adc Disable Interrupt, re-enable at end
  ^~~~~~
  ADC_t
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_rand.cpp:119:20: error: 'ADIE' was not declared in this scope
  ADCSRA &= ~ (1 << ADIE); // adc Disable Interrupt, re-enable at end
                    ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_rand.cpp:119:20: note: suggested alternative: 'ADC0'
  ADCSRA &= ~ (1 << ADIE); // adc Disable Interrupt, re-enable at end
                    ^~~~
                    ADC0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp: In function 'void setupFastAnalogRead(int8_t)':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:43:3: error: 'ADCSRA' was not declared in this scope
   ADCSRA |= (1 << ADPS2);
   ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:43:3: note: suggested alternative: 'ADC_t'
   ADCSRA |= (1 << ADPS2);
   ^~~~~~
   ADC_t
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:101:28: note: suggested alternative: 'A11'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:43:19: error: 'ADPS2' was not declared in this scope
   ADCSRA |= (1 << ADPS2);
                   ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:101:40: error: 'CS10' was not declared in this scope
      clockSelectBits = _BV(CS11) | _BV(CS10);
                                        ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:44:20: error: 'ADPS1' was not declared in this scope
   ADCSRA &= ~(1 << ADPS1);
                    ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:101:40: note: suggested alternative: 'A10'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:107:29: error: 'CS12' was not declared in this scope
       clockSelectBits = _BV(CS12);
                             ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:44:20: note: suggested alternative: 'ADC1'
   ADCSRA &= ~(1 << ADPS1);
                    ^~~~~
                    ADC1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:45:20: error: 'ADPS0' was not declared in this scope
   ADCSRA &= ~(1 << ADPS0);
                    ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:113:30: error: 'CS12' was not declared in this scope
        clockSelectBits = _BV(CS12) | _BV(CS10);
                              ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:45:20: note: suggested alternative: 'ADC0'
   ADCSRA &= ~(1 << ADPS0);
                    ^~~~~
                    ADC0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:47:3: error: 'ADCSRA' was not declared in this scope
   ADCSRA &= ~(1 << ADPS2);
   ^~~~~~
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/hardware_defines.h:5,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:8:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp: In function 'void initialize_twi_nonblock()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:50:9: error: 'PORTD' was not declared in this scope
     sbi(PORTD, 0);
         ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:50:5: note: in expansion of macro 'sbi'
     sbi(PORTD, 0);
     ^~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:113:42: error: 'CS10' was not declared in this scope
        clockSelectBits = _BV(CS12) | _BV(CS10);
                                          ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:50:9: note: suggested alternative: 'PORT0'
     sbi(PORTD, 0);
         ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:50:5: note: in expansion of macro 'sbi'
     sbi(PORTD, 0);
     ^~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:47:3: note: suggested alternative: 'ADC_t'
   ADCSRA &= ~(1 << ADPS2);
   ^~~~~~
   ADC_t
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:47:20: error: 'ADPS2' was not declared in this scope
   ADCSRA &= ~(1 << ADPS2);
                    ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:55:7: error: 'TWSR' was not declared in this scope
   cbi(TWSR, TWPS0);
       ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:55:3: note: in expansion of macro 'cbi'
   cbi(TWSR, TWPS0);
   ^~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:113:42: note: suggested alternative: 'A10'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:118:30: error: 'CS12' was not declared in this scope
        clockSelectBits = _BV(CS12) | _BV(CS10);
                              ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:55:7: note: suggested alternative: 'TWI0'
   cbi(TWSR, TWPS0);
       ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:55:3: note: in expansion of macro 'cbi'
   cbi(TWSR, TWPS0);
   ^~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:55:13: error: 'TWPS0' was not declared in this scope
   cbi(TWSR, TWPS0);
             ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:55:3: note: in expansion of macro 'cbi'
   cbi(TWSR, TWPS0);
   ^~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:48:19: error: 'ADPS1' was not declared in this scope
   ADCSRA |= (1 << ADPS1);
                   ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:118:42: error: 'CS10' was not declared in this scope
        clockSelectBits = _BV(CS12) | _BV(CS10);
                                          ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:55:13: note: suggested alternative: 'TWI0'
   cbi(TWSR, TWPS0);
             ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:55:3: note: in expansion of macro 'cbi'
   cbi(TWSR, TWPS0);
   ^~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:56:13: error: 'TWPS1' was not declared in this scope
   cbi(TWSR, TWPS1);
             ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:56:3: note: in expansion of macro 'cbi'
   cbi(TWSR, TWPS1);
   ^~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:57:3: error: 'TWBR' was not declared in this scope
   TWBR = ((F_CPU / TWI_FREQ) - 16) / 2;
   ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:118:42: note: suggested alternative: 'A10'
In file included from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:27:0:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:121:3: error: 'ICR1' was not declared in this scope
   ICR1 = pwmPeriod;
   ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:57:3: note: suggested alternative: 'TWI0'
   TWBR = ((F_CPU / TWI_FREQ) - 16) / 2;
   ^~~~
   TWI0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:65:3: error: 'TWCR' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA);
   ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:121:3: note: suggested alternative: 'AC1'
   ICR1 = pwmPeriod;
   ^~~~
   AC1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:122:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = TCCR1B_PWM_MODE_BITS | clockSelectBits;
   ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:48:19: note: suggested alternative: 'ADC1'
   ADCSRA |= (1 << ADPS1);
                   ^~~~~
                   ADC1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:49:19: error: 'ADPS0' was not declared in this scope
   ADCSRA |= (1 << ADPS0);
                   ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:65:3: note: suggested alternative: 'TWI0'
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA);
   ^~~~
   TWI0
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/hardware_defines.h:5,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:8:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:65:14: error: 'TWEN' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA);
              ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:65:14: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:65:26: error: 'TWIE' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA);
                          ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:49:19: note: suggested alternative: 'ADC0'
   ADCSRA |= (1 << ADPS0);
                   ^~~~~
                   ADC0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:51:3: error: 'ADCSRA' was not declared in this scope
   ADCSRA &= ~(1 << ADPS2);
   ^~~~~~
In file included from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_utils.cpp:1:0:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_utils.h: In function 'void setPin13Out()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_utils.h:29:2: error: 'DDRB' was not declared in this scope
  DDRB |= B00100000;
  ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:65:26: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:65:38: error: 'TWEA' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA);
                                      ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:122:3: note: suggested alternative: 'TCB1'
   TCCR1B = TCCR1B_PWM_MODE_BITS | clockSelectBits;
   ^~~~~~
   TCB1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h: In member function 'void TimerOne::start()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:130:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = 0;
   ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_utils.h:29:2: note: suggested alternative: 'DD0'
  DDRB |= B00100000;
  ^~~~
  DD0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:65:38: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_utils.h: In function 'void setPin13High()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_utils.h:42:8: error: no match for 'operator|=' (operand types are 'PORT_t {aka PORT_struct}' and 'int')
  PORTB |= B00100000;
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_utils.h: In function 'void setPin13Low()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_utils.h:55:8: error: no match for 'operator&=' (operand types are 'PORT_t {aka PORT_struct}' and 'int')
  PORTB &= B11011111;
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:51:3: note: suggested alternative: 'ADC_t'
   ADCSRA &= ~(1 << ADPS2);
   ^~~~~~
   ADC_t
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp: In function 'uint8_t twi_readFromBlocking(uint8_t, uint8_t*, uint8_t)':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:163:3: error: 'TWCR' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
   ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:51:20: error: 'ADPS2' was not declared in this scope
   ADCSRA &= ~(1 << ADPS2);
                    ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:163:3: note: suggested alternative: 'TWI0'
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
   ^~~~
   TWI0
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:130:3: note: suggested alternative: 'TCB1'
   TCCR1B = 0;
   ^~~~~~
   TCB1
/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/hardware_defines.h:5,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:8:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:163:14: error: 'TWEN' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
              ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:131:3: error: 'TCNT1' was not declared in this scope
   TCNT1 = 0;  // TODO: does this cause an undesired interrupt?
   ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:52:19: error: 'ADPS1' was not declared in this scope
   ADCSRA |= (1 << ADPS1);
                   ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:163:14: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:163:26: error: 'TWIE' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                          ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:52:19: note: suggested alternative: 'ADC1'
   ADCSRA |= (1 << ADPS1);
                   ^~~~~
                   ADC1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:53:20: error: 'ADPS0' was not declared in this scope
   ADCSRA &= ~(1 << ADPS0);
                    ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:131:3: note: suggested alternative: 'TCB1'
   TCNT1 = 0;  // TODO: does this cause an undesired interrupt?
   ^~~~~
   TCB1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h: In member function 'void TimerOne::stop()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:136:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = TCCR1B_PWM_MODE_BITS;
   ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:163:26: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:163:38: error: 'TWEA' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                                      ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:53:20: note: suggested alternative: 'ADC0'
   ADCSRA &= ~(1 << ADPS0);
                    ^~~~~
                    ADC0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp: In function 'void setupMozziADC(int8_t)':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:80:2: error: 'ADCSRA' was not declared in this scope
  ADCSRA |= (1 << ADIE); // adc Enable Interrupt
  ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:163:38: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:163:50: error: 'TWINT' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                                                  ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:136:3: note: suggested alternative: 'TCB1'
   TCCR1B = TCCR1B_PWM_MODE_BITS;
   ^~~~~~
   TCB1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h: In member function 'void TimerOne::restart()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:140:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = 0;
   ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:163:50: note: suggested alternative: 'TWI_t'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:163:63: error: 'TWSTA' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                                                               ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp: In function 'void twi_continueReadFrom()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:234:3: error: 'TWCR' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
   ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:140:3: note: suggested alternative: 'TCB1'
   TCCR1B = 0;
   ^~~~~~
   TCB1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:141:3: error: 'TCNT1' was not declared in this scope
   TCNT1 = 0;
   ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:80:2: note: suggested alternative: 'ADC_t'
  ADCSRA |= (1 << ADIE); // adc Enable Interrupt
  ^~~~~~
  ADC_t
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:80:18: error: 'ADIE' was not declared in this scope
  ADCSRA |= (1 << ADIE); // adc Enable Interrupt
                  ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:234:3: note: suggested alternative: 'TWI0'
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
   ^~~~
   TWI0
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/hardware_defines.h:5,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:8:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:234:14: error: 'TWEN' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
              ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:234:14: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:234:26: error: 'TWIE' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                          ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:141:3: note: suggested alternative: 'TCB1'
   TCNT1 = 0;
   ^~~~~
   TCB1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h: In member function 'void TimerOne::resume()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:146:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = TCCR1B_PWM_MODE_BITS | clockSelectBits;
   ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:146:3: note: suggested alternative: 'TCB1'
   TCCR1B = TCCR1B_PWM_MODE_BITS | clockSelectBits;
   ^~~~~~
   TCB1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h: In member function 'void TimerOne::setPwmDuty(char, unsigned int)':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:157:14: error: 'TIMER1_A_PIN' was not declared in this scope
   if (pin == TIMER1_A_PIN)
              ^~~~~~~~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:234:26: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:234:38: error: 'TWEA' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                                      ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:234:38: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:234:50: error: 'TWINT' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                                                  ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:80:18: note: suggested alternative: 'ADC0'
  ADCSRA |= (1 << ADIE); // adc Enable Interrupt
                  ^~~~
                  ADC0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp: In function 'void disconnectDigitalIn(uint8_t)':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:91:2: error: 'DIDR0' was not declared in this scope
  DIDR0 |= 1<<channel_num;
  ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:234:50: note: suggested alternative: 'TWI_t'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:234:63: error: 'TWSTA' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                                                               ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp: In function 'uint8_t twi_writeToBlocking(uint8_t, uint8_t*, uint8_t, uint8_t)':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:304:3: error: 'TWCR' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
   ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:91:2: note: suggested alternative: 'DD0'
  DIDR0 |= 1<<channel_num;
  ^~~~~
  DD0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp: In function 'void reconnectDigitalIn(uint8_t)':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:98:2: error: 'DIDR0' was not declared in this scope
  DIDR0 &= ~(1<<channel_num);
  ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:98:2: note: suggested alternative: 'DD0'
  DIDR0 &= ~(1<<channel_num);
  ^~~~~
  DD0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp: In function 'void adcDisconnectAllDigitalIns()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:106:3: error: 'DIDR0' was not declared in this scope
   DIDR0 |= 1<<i;
   ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:106:3: note: suggested alternative: 'DD0'
   DIDR0 |= 1<<i;
   ^~~~~
   DD0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:304:3: note: suggested alternative: 'TWI0'
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
   ^~~~
   TWI0
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/hardware_defines.h:5,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:8:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:304:14: error: 'TWEN' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
              ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:157:14: note: suggested alternative: 'TIMERA0'
   if (pin == TIMER1_A_PIN)
              ^~~~~~~~~~~~
              TIMERA0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp: In function 'void adcReconnectAllDigitalIns()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:115:3: error: 'DIDR0' was not declared in this scope
   DIDR0 &= ~(1<<i);
   ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:158:4: error: 'OCR1A' was not declared in this scope
    OCR1A = dutyCycle;
    ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:304:14: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:304:26: error: 'TWIE' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                          ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:115:3: note: suggested alternative: 'DD0'
   DIDR0 &= ~(1<<i);
   ^~~~~
   DD0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:304:26: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:304:38: error: 'TWEA' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                                      ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h: In member function 'void TimerOne::pwm(char, unsigned int)':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:175:14: error: 'TIMER1_A_PIN' was not declared in this scope
   if (pin == TIMER1_A_PIN)
              ^~~~~~~~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp: In function 'void startSecondControlADC()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:258:2: error: 'ADCSRA' was not declared in this scope
  ADCSRA |= (1 << ADSC); // start a second conversion on the current channel
  ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:304:38: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:304:50: error: 'TWINT' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                                                  ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:304:50: note: suggested alternative: 'TWI_t'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:304:63: error: 'TWSTA' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                                                               ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:258:2: note: suggested alternative: 'ADC_t'
  ADCSRA |= (1 << ADSC); // start a second conversion on the current channel
  ^~~~~~
  ADC_t
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:258:18: error: 'ADSC' was not declared in this scope
  ADCSRA |= (1 << ADSC); // start a second conversion on the current channel
                  ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:258:18: note: suggested alternative: 'ADC0'
  ADCSRA |= (1 << ADSC); // start a second conversion on the current channel
                  ^~~~
                  ADC0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp: In function 'void receiveSecondControlADC()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:269:37: error: 'ADC' was not declared in this scope
  analog_readings[current_channel] = ADC; // officially (ADCL | (ADCH << 8)) but the compiler works it out
                                     ^~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp: In function 'void twi_continueWriteTo()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:378:3: error: 'TWCR' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
   ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:378:3: note: suggested alternative: 'TWI0'
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
   ^~~~
   TWI0
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/hardware_defines.h:5,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:8:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:378:14: error: 'TWEN' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
              ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:175:14: note: suggested alternative: 'TIMERA0'
   if (pin == TIMER1_A_PIN)
              ^~~~~~~~~~~~
              TIMERA0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:178:4: error: 'TCCR1A' was not declared in this scope
    TCCR1A |= _BV(COM1A1) | TCCR1A_PWM_MODE_BITS;
    ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/mozzi_analog.cpp:269:37: note: suggested alternative: 'ADC0'
  analog_readings[current_channel] = ADC; // officially (ADCL | (ADCH << 8)) but the compiler works it out
                                     ^~~
                                     ADC0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:178:4: note: suggested alternative: 'TCB1'
    TCCR1A |= _BV(COM1A1) | TCCR1A_PWM_MODE_BITS;
    ^~~~~~
    TCB1
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:14:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:178:18: error: 'COM1A1' was not declared in this scope
    TCCR1A |= _BV(COM1A1) | TCCR1A_PWM_MODE_BITS;
                  ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:378:14: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:378:26: error: 'TWIE' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                          ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:378:26: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:378:38: error: 'TWEA' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                                      ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:378:38: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:378:50: error: 'TWINT' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                                                  ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:378:50: note: suggested alternative: 'TWI_t'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:378:63: error: 'TWSTA' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTA);
                                                               ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp: In function 'void twi_reply(uint8_t)':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:395:5: error: 'TWCR' was not declared in this scope
     TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT) | _BV(TWEA);
     ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:395:5: note: suggested alternative: 'TWI0'
     TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT) | _BV(TWEA);
     ^~~~
     TWI0
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/hardware_defines.h:5,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:8:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:395:16: error: 'TWEN' was not declared in this scope
     TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT) | _BV(TWEA);
                ^
In file included from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:27:0:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:195:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = TCCR1B_PWM_MODE_BITS | clockSelectBits;
   ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:395:16: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:395:28: error: 'TWIE' was not declared in this scope
     TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT) | _BV(TWEA);
                            ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:395:28: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:395:40: error: 'TWINT' was not declared in this scope
     TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT) | _BV(TWEA);
                                        ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:395:40: note: suggested alternative: 'TWI_t'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:395:53: error: 'TWEA' was not declared in this scope
     TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT) | _BV(TWEA);
                                                     ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:395:53: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:397:5: error: 'TWCR' was not declared in this scope
     TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT);
     ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:195:3: note: suggested alternative: 'TCB1'
   TCCR1B = TCCR1B_PWM_MODE_BITS | clockSelectBits;
   ^~~~~~
   TCB1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h: In member function 'void TimerOne::disablePwm(char)':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:208:14: error: 'TIMER1_A_PIN' was not declared in this scope
   if (pin == TIMER1_A_PIN) {
              ^~~~~~~~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:397:5: note: suggested alternative: 'TWI0'
     TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT);
     ^~~~
     TWI0
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/hardware_defines.h:5,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:8:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:397:16: error: 'TWEN' was not declared in this scope
     TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT);
                ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:397:16: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:397:28: error: 'TWIE' was not declared in this scope
     TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT);
                            ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:397:28: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:397:40: error: 'TWINT' was not declared in this scope
     TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWINT);
                                        ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:397:40: note: suggested alternative: 'TWI_t'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp: In function 'void twi_stop()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:412:3: error: 'TWCR' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTO);
   ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:412:3: note: suggested alternative: 'TWI0'
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTO);
   ^~~~
   TWI0
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/hardware_defines.h:5,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:8:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:412:14: error: 'TWEN' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTO);
              ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:412:14: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:412:26: error: 'TWIE' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTO);
                          ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:412:26: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:412:38: error: 'TWEA' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTO);
                                      ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:412:38: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:412:50: error: 'TWINT' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTO);
                                                  ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:412:50: note: suggested alternative: 'TWI_t'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:412:63: error: 'TWSTO' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT) | _BV(TWSTO);
                                                               ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp: In function 'void twi_releaseBus()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:441:3: error: 'TWCR' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT);
   ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:441:3: note: suggested alternative: 'TWI0'
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT);
   ^~~~
   TWI0
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/hardware_defines.h:5,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:8:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:441:14: error: 'TWEN' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT);
              ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:208:14: note: suggested alternative: 'TIMERA0'
   if (pin == TIMER1_A_PIN) {
              ^~~~~~~~~~~~
              TIMERA0
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:209:4: error: 'TCCR1A' was not declared in this scope
    TCCR1A &= ~_BV(COM1A1);
    ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:441:14: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:441:26: error: 'TWIE' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT);
                          ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:441:26: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:441:38: error: 'TWEA' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT);
                                      ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:441:38: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:441:50: error: 'TWINT' was not declared in this scope
   TWCR = _BV(TWEN) | _BV(TWIE) | _BV(TWEA) | _BV(TWINT);
                                                  ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:209:4: note: suggested alternative: 'TCB1'
    TCCR1A &= ~_BV(COM1A1);
    ^~~~~~
    TCB1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:441:50: note: suggested alternative: 'TWI_t'
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:14:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:209:19: error: 'COM1A1' was not declared in this scope
    TCCR1A &= ~_BV(COM1A1);
                   ^
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/compat/twi.h:36:0,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.h:16,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:13:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp: In function 'void TWI_vect()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:457:10: error: 'TWSR' was not declared in this scope
   switch(TW_STATUS){
          ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:457:10: note: suggested alternative: 'TWI0'
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/hardware_defines.h:5,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:8:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:457:10: error: 'TWS7' was not declared in this scope
   switch(TW_STATUS){
          ^
「MozziGuts.h」に対して複数のライブラリが見つかりました
使用済：/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:457:10: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:457:10: error: 'TWS6' was not declared in this scope
   switch(TW_STATUS){
          ^
In file included from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:27:0:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h: In member function 'void TimerOne::attachInterrupt(void (*)())':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:234:3: error: 'TIMSK1' was not declared in this scope
   TIMSK1 = _BV(TOIE1);
   ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:457:10: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:457:10: error: 'TWS5' was not declared in this scope
   switch(TW_STATUS){
          ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:457:10: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:457:10: error: 'TWS4' was not declared in this scope
   switch(TW_STATUS){
          ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:234:3: note: suggested alternative: 'TIMERB1'
   TIMSK1 = _BV(TOIE1);
   ^~~~~~
   TIMERB1
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:14:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:234:16: error: 'TOIE1' was not declared in this scope
   TIMSK1 = _BV(TOIE1);
                ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:457:10: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:457:10: error: 'TWS3' was not declared in this scope
   switch(TW_STATUS){
          ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:457:10: note: suggested alternative: 'TWI0'
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:462:7: error: 'TWDR' was not declared in this scope
       TWDR = twi_slarw;
       ^~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/twi_nonblock.cpp:462:7: note: suggested alternative: 'TWI0'
       TWDR = twi_slarw;
       ^~~~
       TWI0
In file included from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:27:0:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h: In member function 'void TimerOne::detachInterrupt()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:250:3: error: 'TIMSK1' was not declared in this scope
   TIMSK1 = 0;
   ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:250:3: note: suggested alternative: 'TIMERB1'
   TIMSK1 = 0;
   ^~~~~~
   TIMERB1
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:14:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h: In member function 'void TimerOne::setMode(unsigned char)':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:279:31: error: 'WGM13' was not declared in this scope
    TCCR1B_PWM_MODE_BITS = _BV(WGM13) | _BV(WGM12);
                               ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:279:44: error: 'WGM12' was not declared in this scope
    TCCR1B_PWM_MODE_BITS = _BV(WGM13) | _BV(WGM12);
                                            ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:280:31: error: 'WGM11' was not declared in this scope
    TCCR1A_PWM_MODE_BITS = _BV(WGM11);
                               ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:282:32: error: 'WGM13' was not declared in this scope
    TCCR1B_PWM_MODE_BITS  = _BV(WGM13);
                                ^
In file included from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:27:0:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:285:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = TCCR1B_PWM_MODE_BITS;        // set mode as fast or phase and frequency correct pwm, stop the timer
   ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:285:3: note: suggested alternative: 'TCB1'
   TCCR1B = TCCR1B_PWM_MODE_BITS;        // set mode as fast or phase and frequency correct pwm, stop the timer
   ^~~~~~
   TCB1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:286:3: error: 'TCCR1A' was not declared in this scope
   TCCR1A = TCCR1A_PWM_MODE_BITS;        // set control register A
   ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/utility/TimerOne.h:286:3: note: suggested alternative: 'TCB1'
   TCCR1A = TCCR1A_PWM_MODE_BITS;        // set control register A
   ^~~~~~
   TCB1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp: In function 'void backupPreMozziTimer1()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:129:22: error: 'TCCR1A' was not declared in this scope
   pre_mozzi_TCCR1A = TCCR1A;
                      ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:129:22: note: suggested alternative: 'TCB1'
   pre_mozzi_TCCR1A = TCCR1A;
                      ^~~~~~
                      TCB1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:130:22: error: 'TCCR1B' was not declared in this scope
   pre_mozzi_TCCR1B = TCCR1B;
                      ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:130:22: note: suggested alternative: 'TCB1'
   pre_mozzi_TCCR1B = TCCR1B;
                      ^~~~~~
                      TCB1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:131:21: error: 'OCR1A' was not declared in this scope
   pre_mozzi_OCR1A = OCR1A;
                     ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:132:22: error: 'TIMSK1' was not declared in this scope
   pre_mozzi_TIMSK1 = TIMSK1;
                      ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:132:22: note: suggested alternative: 'TIMERB1'
   pre_mozzi_TIMSK1 = TIMSK1;
                      ^~~~~~
                      TIMERB1
In file included from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.h:193:0,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:20:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp: In function 'void startAudioStandard()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/AudioConfigStandardPlus.h:23:29: error: 'TIMER1_A_PIN' was not declared in this scope
 #define AUDIO_CHANNEL_1_PIN TIMER1_A_PIN // defined in TimerOne/config/known_16bit_timers.h
                             ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:603:11: note: in expansion of macro 'AUDIO_CHANNEL_1_PIN'
   pinMode(AUDIO_CHANNEL_1_PIN, OUTPUT); // set pin to output for audio
           ^~~~~~~~~~~~~~~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/AudioConfigStandardPlus.h:23:29: note: suggested alternative: 'TIMERA0'
 #define AUDIO_CHANNEL_1_PIN TIMER1_A_PIN // defined in TimerOne/config/known_16bit_timers.h
                             ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:603:11: note: in expansion of macro 'AUDIO_CHANNEL_1_PIN'
   pinMode(AUDIO_CHANNEL_1_PIN, OUTPUT); // set pin to output for audio
           ^~~~~~~~~~~~~~~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:618:3: error: 'TIMSK1' was not declared in this scope
   TIMSK1 = _BV(TOIE1); // Overflow Interrupt Enable (when not using
   ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:618:3: note: suggested alternative: 'TIMERB1'
   TIMSK1 = _BV(TOIE1); // Overflow Interrupt Enable (when not using
   ^~~~~~
   TIMERB1
In file included from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/io.h:99:0,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/arduino/tools/avr-gcc/7.3.0-atmel3.6.1-arduino5/avr/include/avr/pgmspace.h:90,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/String.h:30,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Print.h:24,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Stream.h:25,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/Client.h:22,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/api/ArduinoAPI.h:29,
                 from /Users/tatsuro.homma/Library/Arduino15/packages/megaTinyCore/hardware/megaavr/1.1.8/cores/arduino/Arduino.h:23,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:14:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:618:16: error: 'TOIE1' was not declared in this scope
   TIMSK1 = _BV(TOIE1); // Overflow Interrupt Enable (when not using
                ^
In file included from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.h:193:0,
                 from /Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:20:
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp: In function 'void TIMER1_OVF_vect()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/AudioConfigStandardPlus.h:20:41: error: 'OCR1A' was not declared in this scope
 #define AUDIO_CHANNEL_1_OUTPUT_REGISTER OCR1A
                                         ^
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:645:3: note: in expansion of macro 'AUDIO_CHANNEL_1_OUTPUT_REGISTER'
   AUDIO_CHANNEL_1_OUTPUT_REGISTER = output_buffer.read();
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp: In function 'void stopMozzi()':
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:815:3: error: 'TCCR1A' was not declared in this scope
   TCCR1A = pre_mozzi_TCCR1A;
   ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:815:3: note: suggested alternative: 'TCB1'
   TCCR1A = pre_mozzi_TCCR1A;
   ^~~~~~
   TCB1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:816:3: error: 'TCCR1B' was not declared in this scope
   TCCR1B = pre_mozzi_TCCR1B;
   ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:816:3: note: suggested alternative: 'TCB1'
   TCCR1B = pre_mozzi_TCCR1B;
   ^~~~~~
   TCB1
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:817:3: error: 'OCR1A' was not declared in this scope
   OCR1A = pre_mozzi_OCR1A;
   ^~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:819:3: error: 'TIMSK1' was not declared in this scope
   TIMSK1 = pre_mozzi_TIMSK1;
   ^~~~~~
/Users/tatsuro.homma/Documents/Arduino/libraries/Mozzi/MozziGuts.cpp:819:3: note: suggested alternative: 'TIMERB1'
   TIMSK1 = pre_mozzi_TIMSK1;
   ^~~~~~
   TIMERB1
exit status 1
ボードATtiny3216/1616/1606/816/806/416/406に対するコンパイル時にエラーが発生しました。

「ファイル」メニューの「環境設定」から
「より詳細な情報を表示する：コンパイル」を有効にすると
より詳しい情報が表示されます。