<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="9.2.2">
<drawing>
<board>
<plain>
<wire x1="10.287" y1="60.706" x2="0.127" y2="50.8" width="0.000253125" layer="20"/>
<wire x1="0.127" y1="50.8" x2="0.127" y2="0" width="0.000253125" layer="20"/>
<wire x1="0.127" y1="0" x2="39.37" y2="0" width="0.000253125" layer="20"/>
<wire x1="39.37" y1="0" x2="49.022" y2="9.652" width="0.000253125" layer="20"/>
<wire x1="49.022" y1="9.652" x2="49.149" y2="60.833" width="0.000253125" layer="20"/>
<wire x1="49.149" y1="60.833" x2="10.287" y2="60.706" width="0.000253125" layer="20"/>
<hole x="4.86561875" y="5.139409375" drill="2.99999375"/>
<hole x="44.325490625" y="56.271834375" drill="2.999740625"/>
<hole x="44.323" y="14.605" drill="2.999740625"/>
</plain>
<libraries>
<library name="fab">
<packages>
<package name="C1206FAB">
</package>
<package name="TQFP32-08THIN">
</package>
<package name="ED555DS-2DS">
</package>
<package name="R1206">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;</description>
</package>
<package name="R1206FAB">
</package>
<package name="SOT-23">
<description>&lt;b&gt;Small Outline Transistor&lt;/b&gt;</description>
</package>
<package name="2X03SMD">
</package>
<package name="1X06SMD">
</package>
<package name="LED1206FAB">
<description>LED1206 FAB style (smaller pads to allow trace between)</description>
</package>
<package name="SOT223">
<description>&lt;b&gt;SOT-223&lt;/b&gt;</description>
</package>
</packages>
</library>
<library name="pinhead">
<description>&lt;b&gt;Pin Header Connectors&lt;/b&gt;&lt;p&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
<package name="1X02">
<description>&lt;b&gt;PIN HEADER&lt;/b&gt;</description>
</package>
<package name="1X03">
<description>&lt;b&gt;PIN HEADER&lt;/b&gt;</description>
</package>
</packages>
</library>
<library name="crystal">
<description>&lt;b&gt;Crystals and Crystal Resonators&lt;/b&gt;&lt;p&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
<package name="CSM-7X-DU">
<description>&lt;b&gt;SMD CRYSTAL&lt;/b&gt;&lt;p&gt;
Source: www.ecsxtal.com .. Crystal 3.6864MHz CSM_7X_DU.PDF</description>
</package>
</packages>
</library>
<library name="con-molex">
<description>&lt;b&gt;Molex Connectors&lt;/b&gt;&lt;p&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
<package name="74099-08">
<description>&lt;b&gt;SL™ Wire-to-Board Header, Surface Mount, Single Row, Vertical, 3.05mm Pocket, Shrouded, 8 Circuits, Tin (Sn) Plating&lt;/b&gt;&lt;p&gt;&lt;a href =http://www.molex.com/pdm_docs/sd/705530008_sd.pdf&gt;Datasheet &lt;/a&gt;</description>
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="C1" library="fab" package="C1206FAB" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C2" library="fab" package="C1206FAB" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C3" library="fab" package="C1206FAB" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C4" library="fab" package="C1206FAB" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C5" library="fab" package="C1206FAB" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="IC1" library="fab" package="TQFP32-08THIN" value="ATMEGA88-THIN">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="J1" library="fab" package="ED555DS-2DS" value="TERM-1X02-FABLAB">
<attribute name="NAME"/>
</element>
<element name="JP2" library="pinhead" package="1X02" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="PIR" library="pinhead" package="1X03" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="Q1" library="crystal" package="CSM-7X-DU" value="CSM-7X-DU">
<attribute name="MF" value=""/>
<attribute name="MPN" value=""/>
<attribute name="NAME"/>
<attribute name="OC_FARNELL" value="unknown"/>
<attribute name="OC_NEWARK" value="unknown"/>
<attribute name="VALUE"/>
</element>
<element name="R1" library="fab" package="R1206" value="1K">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R2" library="fab" package="R1206FAB" value="4.7OHM">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R3" library="fab" package="R1206FAB" value="4.7OHM">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R5" library="fab" package="R1206FAB" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="T2" library="fab" package="SOT-23" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="U$1" library="fab" package="2X03SMD" value="AVRISPSMD">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="U$2" library="fab" package="1X06SMD" value="FTDI-SMD-HEADER">
<attribute name="NAME"/>
</element>
<element name="U$4" library="fab" package="LED1206FAB" value="LEDFAB1206">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="U$5" library="fab" package="LED1206FAB" value="LEDFAB1206">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="U1" library="fab" package="SOT223" value="">
<attribute name="NAME"/>
<attribute name="PROD_ID" value="VREG-08170"/>
<attribute name="VALUE"/>
</element>
<element name="R4" library="fab" package="R1206FAB" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R6" library="fab" package="R1206FAB" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="NEOPIXE_LED" library="pinhead" package="1X03" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="X2" library="con-molex" package="74099-08" value="C-GRID-08-74099">
<attribute name="MF" value="MOLEX"/>
<attribute name="MPN" value=""/>
<attribute name="NAME"/>
<attribute name="OC_FARNELL" value="unknown"/>
<attribute name="OC_NEWARK" value="unknown"/>
<attribute name="VALUE"/>
</element>
<element name="R7" library="fab" package="R1206FAB" value="4.7OHM">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="U$3" library="fab" package="LED1206FAB" value="LEDFAB1206">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
</elements>
<signals>
<signal name="N$1">
<contactref element="IC1" pad="7"/>
<contactref element="Q1" pad="2"/>
<contactref element="C1" pad="1"/>
</signal>
<signal name="N$2">
<contactref element="IC1" pad="8"/>
<contactref element="Q1" pad="1"/>
<contactref element="C2" pad="2"/>
</signal>
<signal name="GND">
<contactref element="C1" pad="2"/>
<contactref element="C2" pad="1"/>
<contactref element="IC1" pad="21"/>
<contactref element="IC1" pad="3"/>
<contactref element="IC1" pad="5"/>
<contactref element="U$1" pad="6"/>
<contactref element="U$2" pad="1"/>
<contactref element="C5" pad="1"/>
<contactref element="C4" pad="1"/>
<contactref element="U1" pad="1"/>
<contactref element="J1" pad="2"/>
<contactref element="R2" pad="1"/>
<contactref element="R3" pad="1"/>
<contactref element="T2" pad="2"/>
<contactref element="PIR" pad="3"/>
<contactref element="R6" pad="1"/>
<contactref element="R6" pad="2"/>
<contactref element="NEOPIXE_LED" pad="3"/>
<contactref element="X2" pad="2"/>
<contactref element="R7" pad="1"/>
</signal>
<signal name="MISO">
<contactref element="U$1" pad="1"/>
<contactref element="IC1" pad="16"/>
</signal>
<signal name="SCK">
<contactref element="U$1" pad="3"/>
<contactref element="IC1" pad="17"/>
</signal>
<signal name="RST">
<contactref element="U$1" pad="5"/>
<contactref element="C3" pad="1"/>
<contactref element="IC1" pad="29"/>
<contactref element="R5" pad="1"/>
</signal>
<signal name="VCC">
<contactref element="U$1" pad="2"/>
<contactref element="IC1" pad="18"/>
<contactref element="IC1" pad="4"/>
<contactref element="IC1" pad="6"/>
<contactref element="U$2" pad="3"/>
<contactref element="U1" pad="2"/>
<contactref element="U1" pad="4"/>
<contactref element="C5" pad="2"/>
<contactref element="R5" pad="2"/>
<contactref element="PIR" pad="1"/>
<contactref element="R4" pad="1"/>
<contactref element="R4" pad="2"/>
<contactref element="NEOPIXE_LED" pad="1"/>
<contactref element="X2" pad="1"/>
<contactref element="U$3" pad="1"/>
</signal>
<signal name="MOSI">
<contactref element="U$1" pad="4"/>
<contactref element="IC1" pad="15"/>
</signal>
<signal name="CTS">
<contactref element="U$2" pad="2"/>
<contactref element="IC1" pad="32"/>
</signal>
<signal name="PD0">
<contactref element="U$2" pad="4"/>
<contactref element="IC1" pad="30"/>
</signal>
<signal name="PD1">
<contactref element="U$2" pad="5"/>
<contactref element="IC1" pad="31"/>
</signal>
<signal name="N$3">
<contactref element="U$2" pad="6"/>
<contactref element="C3" pad="2"/>
</signal>
<signal name="VSS">
<contactref element="U1" pad="3"/>
<contactref element="C4" pad="2"/>
<contactref element="J1" pad="1"/>
<contactref element="JP2" pad="1"/>
</signal>
<signal name="INT">
<contactref element="IC1" pad="2"/>
<contactref element="X2" pad="8"/>
</signal>
<signal name="SCL">
<contactref element="IC1" pad="28"/>
<contactref element="X2" pad="3"/>
</signal>
<signal name="SDA">
<contactref element="IC1" pad="27"/>
<contactref element="X2" pad="4"/>
</signal>
<signal name="N$4">
<contactref element="R2" pad="2"/>
<contactref element="U$5" pad="2"/>
</signal>
<signal name="N$5">
<contactref element="R3" pad="2"/>
<contactref element="U$4" pad="2"/>
</signal>
<signal name="D3">
<contactref element="IC1" pad="1"/>
<contactref element="U$5" pad="1"/>
<contactref element="NEOPIXE_LED" pad="2"/>
</signal>
<signal name="D5">
<contactref element="IC1" pad="9"/>
<contactref element="U$4" pad="1"/>
</signal>
<signal name="D6">
<contactref element="IC1" pad="10"/>
<contactref element="R1" pad="1"/>
</signal>
<signal name="N$8">
<contactref element="JP2" pad="2"/>
<contactref element="T2" pad="1"/>
</signal>
<signal name="N$9">
<contactref element="T2" pad="3"/>
<contactref element="R1" pad="2"/>
</signal>
<signal name="D7">
<contactref element="PIR" pad="2"/>
<contactref element="IC1" pad="11"/>
</signal>
<signal name="N$6">
<contactref element="R7" pad="2"/>
<contactref element="U$3" pad="2"/>
</signal>
</signals>
</board>
</drawing>
</eagle>
