>NAME >VALUE CAPACITOR >NAME >VALUE >NAME >VALUE CAPACITOR >NAME >VALUE 1 >NAME >VALUE PIN HEADER >NAME >VALUE 1 >NAME RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE >NAME >VALUE SOT-223 >NAME >VALUE >NAME >NAME LED 1206 pads (standard pattern) >NAME >VALUE LED1206 FAB style (smaller pads to allow trace between) >NAME >VALUE 5mm round through hole part. >NAME >VALUE Small Outline Transistor >VALUE >NAME SMALL OUTLINE TRANSISTOR TS-003 >NAME >VALUE >NAME >VALUE non-polarized capacitor >NAME >VALUE >NAME >VALUE MISO SCK RST VCC MOSI GND (Black) (Green) >NAME >VALUE >NAME >VALUE ADJ IN OUT OUT >Name 1 2 LED >NAME >VALUE >VALUE >NAME G S D Resistor (US Symbol) Variants with postfix FAB are widened to allow the routing of internal traces Voltage Regulator LM1117 Standard adjustable voltage regulator but in SMD form. Spark Fun Electronics SKU : COM-00595 3.5mm terminal block, 2 positions ED555-2DS as found in the fablab inventory. Stolen from <a href="http://www.ladyada.net/library/pcb/eaglelibrary.html">Adafruit</a>, adapted by Zaerc. LED MOS FET Crystals and Crystal Resonators <author>Created by librarian@cadsoft.de</author> SMD CRYSTAL Source: www.ecsxtal.com .. Crystal 3.6864MHz CSM_7X_DU.PDF >NAME >VALUE SMD CRYSTAL Source: www.ecsxtal.com .. Crystal 3.6864MHz CSM_7X_DU.PDF >NAME >VALUE 1 2 SMD CRYSTAL Source: www.ecsxtal.com .. Crystal 3.6864MHz CSM_7X_DU.PDF Pin Header Connectors <author>Created by librarian@cadsoft.de</author> PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE PIN HEADER >NAME >VALUE PIN HEADER PIN HEADER PIN HEADER PIN HEADER >NAME >VALUE >NAME >VALUE PIN HEADER PIN HEADER Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE SUPPLY SYMBOL Molex Connectors <author>Created by librarian@cadsoft.de</author> 2.54mm Pitch SL™ Header, Single Row, Vertical, 3.05mm Pocket, Shrouded, 9 Circuits, 0.38µm Gold (Au) Selective Plating, Tin (Sn) PC Tail Plating<a href =http://www.molex.com/pdm_docs/sd/705430008_sd.pdf>Datasheet </a> >NAME >VALUE 1 2.54mm Pitch SL™ Header, Low Profile, Single Row, Right Angle, 3.05mm Pocket, Shrouded, 9 Circuits, 0.38µm Gold (Au) Selective Plating, Tin (Sn) PC Tail Plating<a href =http://www.molex.com/pdm_docs/sd/705530008_sd.pdf>Datasheet </a> >NAME >VALUE SL™ Wire-to-Board Header, Surface Mount, Single Row, Vertical, 3.05mm Pocket, Shrouded, 8 Circuits, Tin (Sn) Plating<a href =http://www.molex.com/pdm_docs/sd/705530008_sd.pdf>Datasheet </a> >NAME >VALUE 1 2.54mm Pitch SL™ Wire-to-Board Header, Low Profile, Surface Mount, Single Row, Right Angle, 3.05mm Pocket, Shrouded, with Press-fit Plastic Peg, 8 Circuits, Tin (Sn) Plating<a href =http://www.molex.com/pdm_docs/sd/015913084_sd.pdf>Datasheet </a> >NAME >VALUE >NAME >VALUE >NAME CONNECTOR wire to board 2.54 mm (0.100") pitch header Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.